Specifications of pipe making machine, tube mill line, welded pipe
production line
1.Spirally Mild Steel Mill
2.high-quality
3.small power consumption
4.longer life expectancy
5.high yield
Technical Specifications of pipe making machine, tube mill line,
welded pipe production line:
Φ245-Φ1020 Spirally Welded Stainless Steel Tube Mill.The production
line is flow process from start to finish.The ultrasonic flaw
detection,X Ray inspection and hydraulic test can all be carried
out continuously.It can be used to produce the spirally welded
pipes with its quality in conformity with API standard.
outer diameter: | Φ219-Φ820mm Φ426-Φ1420mm |
wall thickness: | 5-12.7mm 6-16mm |
Length: | 8-12.5mm 8-12.5mm |
Raw Material hot rolled coils: |
inner diameter Φ508-Φ760mm Φ508-Φ760mm |
outer diameter: | 1200-Φ2000mm Φ1200-Φ2000mm |
width(before shearing): | 550-1550mm 600-1550mm |
thickness: 5-16mm 6-16mm |
coil weight(max): | 25t 30t |
The quality of the material: API-5LS X60-X65 |
yielding limit: | 457N/mm² 457N/mm² |
strength limit: | 562N/mm² 562N/mm² |
Welding methods: |
butt welding single wire submerged-arc welding |
inner welding single wire submerged-arc welding |
outer welding single or double wire submerged-welding |
line speed: 0.6-3.6m/min |
Feeding and drawing force: 60t 120t |
pressure of hydraulic press: 7.5-21Mpa |
Product quality of pipe making machine, tube mill line, welded pipe
production line:
Pipe product of this unit meet with required standard.
Process flow of pipe making machine, tube mill line, welded pipe
production line:
Uncoiling→pinching& leveling→electric vertical roll→cutting& butt
welding→electric vertical roll→rotary shear→vertical roll→delivery
m/c→guide board→forming unit→inside welding→outside welding→flying
cutting→pulling out
process flow mentioned above is general arrangement of host
machine, which can be revised , such as to add pipe beveling
machine, pipe hydrotester, as well as NDT testing equipment to meet
with relative international standard.
Annual output:
to be designed as per user's requirement
After-sale service:
1 year's guarantee is available, offer technical guidance of
installation& commissioning at home& abroad.
Below is general layout of host machine and reference photos of
spiral pipe machine, including preparation area, pre-bnd guiding&
forming unit, as well as beveling and hydrostatic testing
equipment. Machinery in finishing area, such as pipe beveling
machine, hydrostatic testing machine is opptional.
